Dental die separate cut machine

Dental die separate cut machine ZB-CM
Description:

The High Speed Cutting Lathe is widely used to polish all kinds of metals in restorative dentistry. The housing of this machine is made of aluminum alloy, which makes it reliable and corrosion resistant. This machine has low noise and high power, the rotational speed can reach up to 14,000 rpm. The DEMCO grinding head which is imported from the USA ensures the quality of the machine.

Specifications:

Voltage:AC220/50HZ±10%   110V/60Hz±10%
Power:370W
Rotational speed:2800rpm
Dimensions:35×29×30 (cm)
Speed of the head:20000rpm
Gross weight:14KG

Instructions:
1. Unpack the package, check if all the accessories are included. Read this manual carefully before using.
2. Connect the machine to a electric inlet, make sure the voltage is compatible with this machine.
3. Open the clamp with a spanner.
4. Put in a stone-holding pin or abrasive disc (make sure the stone-holding pin or the abrasive disc is compatible with the diameter of the clamp).
5. Rotate the switch from slow mode to fast mode, observe if the abrasive disc is shaking.